Best Raspberry Pi 4 Cases of 2020

Raspberry Pi 4 Cases 2020
Don't skip out on a proper case for your Pi 4.
Ash Ash (242)
0

The Raspberry Pi 4 is the latest SBC model released by the Raspberry Pi Foundation. Unlike previous editions, it has a few cooling requirements that make case selection an important part of the project design process. If you're not sure where to start, this list can help you in your research. These are some of the most popular cases made just for the Pi 4.

Here's everything you'll need to complete this guide:

Raspberry Pi 4 Model BRaspberry Pi 4 Model B×1
Official Raspberry Pi 4 Case
 Photo: Raspberry Pi Foundation

Manufacturer: Raspberry Pi Foundation

Spec Case
Size 2.76" x 3.74" x 1.18"
Material ABS
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C

This is the official Raspberry Pi 4 case released by the Raspberry Pi Foundation. It's a high-quality case made from ABS plastic with Raspberry Pi themed colors. You'll need to remove the top to get access to the GPIO pins, but there are cutouts that allow access to all of the side ports.

Smraza Raspberry Pi 4 Case
 Photo: Smraza

Manufacturer: Smraza

Spec Case
Size 6.8" x 4.3" x 1.7"
Material Acrylic
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C
Cooling 35 x 35 mm Cooling Fan, heat sinks

This Pi 4 case was designed by a team over at Smraza. It has an acrylic chassis with cutouts for each of the side ports. It comes with multiple aluminum heat sinks and a 35mm x 35mm fan for cooling. If you want a case that will keep your Pi cool, these are the components you want to look for.

iUniker Raspberry Pi 4 Case
 Photo: iUniker

Manufacturer: iUniker

Spec Case
Size 4.72" x 2.36" x 1.57"
Material ABS
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C
Cooling 40mm fan, heat sinks

This Pi 4 case from iUniker was designed with Pi enthusiasts in mind. If one thing is certain, easy access to the GPIO pins is always a plus. Not only does this case come with multiple heat sinks and a 40mm fan, but the top is easily removable for quick access to the GPIO pins and camera.

Argon NEO Aluminum Raspberry Pi 4 Case
 Photo: Argon Forty

Manufacturer: Argon Forty

Spec Case
Size 3.86" x 2.95" x 1.1"
Material Aluminum
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C
Cooling Metal Chassis / Passive Cooling

Argon Forty's Raspberry Pi 4 case is made entirely from aluminum, effectively turning the whole housing into a heat sink with passive cooling. Another cool feature with this case is the magnetic top, it's easy to snap on and off for quick access to the GPIO pins and camera port.

MazerPi Aluminum Pi 4 Case
 Photo: MazerPi

Manufacturer: MazerPi

Spec Case
Size 3.94" x 1.57" x 2.36"
Material Aluminium Alloy
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C
Cooling Dual Cooling Fan

If you're looking for a case that can keep your unit cool while providing the most access to critical ports, the MazerPi Case is your best bet. It has an aluminum chassis for passive cooling, two cooling fans, and a removable top for GPIO and camera port access. It also comes with thermal tape to help with heat dispersion.