The Best Raspberry Pi 4 Cases (2022)

Don't skip out on a proper case for your Pi 4.
Ash Ash (362)
0

The Raspberry Pi 4 is the latest SBC model released by the Raspberry Pi Foundation. Unlike previous editions, it has a few cooling requirements that make case selection an important part of the project design process. If you're not sure where to start, this list can help you in your research. These are some of the most popular cases made just for the Pi 4.

You may also be interested in our list of best keyboards for the Raspberry Pi.

Raspberry Pi 4 Model BRaspberry Pi 4 Model B ×1

Howchoo is reader-supported. As an Amazon Associate, we may earn a small affiliate commission at no cost to you when you buy through our links.

Manufacturer: Raspberry Pi Foundation

Spec Case
Size 2.76" x 3.74" x 1.18"
Material ABS
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C

This is the official Raspberry Pi 4 case released by the Raspberry Pi Foundation. It's a high-quality case made from ABS plastic with Raspberry Pi themed colors. You'll need to remove the top to get access to the GPIO pins, but there are cutouts that allow access to all of the side ports.

Manufacturer: Smraza

Spec Case
Size 6.8" x 4.3" x 1.7"
Material Acrylic
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C
Cooling 35 x 35 mm Cooling Fan, heat sinks

This Pi 4 case was designed by a team over at Smraza. It has an acrylic chassis with cutouts for each of the side ports. It comes with multiple aluminum heat sinks and a 35mm x 35mm fan for cooling. If you want a case that will keep your Pi cool, these are the components you want to look for.

Manufacturer: iUniker

Spec Case
Size 4.72" x 2.36" x 1.57"
Material ABS
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C
Cooling 40mm fan, heat sinks

This Pi 4 case from iUniker was designed with Pi enthusiasts in mind. If one thing is certain, easy access to the GPIO pins is always a plus. Not only does this case come with multiple heat sinks and a 40mm fan, but the top is easily removable for quick access to the GPIO pins and camera.

Manufacturer: Argon Forty

Spec Case
Size 3.86" x 2.95" x 1.1"
Material Aluminum
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C
Cooling Metal Chassis / Passive Cooling

Argon Forty's Raspberry Pi 4 case is made entirely from aluminum, effectively turning the whole housing into a heat sink with passive cooling. Another cool feature with this case is the magnetic top, it's easy to snap on and off for quick access to the GPIO pins and camera port.

Manufacturer: MazerPi

Spec Case
Size 3.94" x 1.57" x 2.36"
Material Aluminium Alloy
Cutouts HDMI, USB, Ethernet, Audio/Video, microSD, and USB-C
Cooling Dual Cooling Fan

If you're looking for a case that can keep your unit cool while providing the most access to critical ports, the MazerPi Case is your best bet. It has an aluminum chassis for passive cooling, two cooling fans, and a removable top for GPIO and camera port access. It also comes with thermal tape to help with heat dispersion.

Find amazing Pi projects for any skill level!
Zach Zach (248)
0

So you just got a new Raspberry Pi. Not sure what to do with it? No problem. We've built a list of the most popular Raspberry Pi guides that you can follow step by step.