How to Log into an AT&T Router and AT&T U-verse Router

John John (304)
1 minute

Also known as your AT&T Wireless Gateway, you can log in to your AT&T router simply by visiting this page, while connected to your AT&T network. That will allow you to log in to your AT&T router and make any changes you need.

What kinds of changes can I make once I log in to the AT&T router?

Log in to your AT&T router to change your Wi-Fi password, customize your network name, change security settings, and much more.

Note that AT&T has discontinued the U-verse router as of 2020. If you're still using an AT&T U-verse router, however, this guide will still work for you to log in to the AT&T U-verse router.

AT&T router ×1
Computer, tablet, or mobile device ×1

Howchoo is reader-supported. As an Amazon Associate, we may earn a small affiliate commission at no cost to you when you buy through our links.

ATT connection on Mac

Make sure that you're connected to your AT&T network either via WiFi or ethernet. (Hint: if you're able to visit this website over your AT&T network, then you're connected.)

Att Router login Ip address

Or click here: http://192.168.1.254.

As long as you are connected to your network, then you will not be asked for a password.

If you're asked for a password when logging into AT&T Router

  • Try leaving the page blank and hitting enter.

If that does not work:

  • Your default username (if you haven't made any changes) will be admin.
  • Try leaving the password field blank.

If that did not work: - Your password can be found on the sticker on the side of your AT&T router and/or modem. - Use that password with the admin username. - If you still can not find the password, then you'll need to contact AT&T for help logging into your router.

Wipe your AT&T U-Verse settings
Ash Ash (362)
5 minutes

Whether you're troubleshooting or setting up a new network, factory resetting your router or modem is sometimes necessary. AT&T U-Verse users can reset their devices to factory default, as well.