How to Make DIY Mercury Glass (the Easy Way!)

1 hour

Mercury glass can be expensive, but we wanted this effect for the centerpieces for our wedding. It was a fairly easy project, and didn't take long.

Mirror effect spray paintMirror effect spray paint ×1 can
spray bottle ×1
White VinegarWhite Vinegar ×1
glass vase ×1
Paper TowelsPaper Towels ×1 roll

Howchoo is reader-supported. As an Amazon Associate, we may earn a small affiliate commission at no cost to you when you buy through our links.

Prepare a work space

This project will be messy since you'll be spray painting your glass. I put down an old plastic table cloth on a table on our patio, but you can use newspaper or whatever is available. Also gather your supplies and setup your glass containers. Make sure to put plenty of space between the glass.

Mix equal amounts of water and vinegar inside the spray bottle. This doesn't have to be exact so it's safe to estimate.

Spray the glass with the vinegar solution

Spray all sides of your glass containers with the vinegar solution. Be sure to use a mist setting on the bottle. They shouldn't be completely soaked, but you should be able to see an even coating of droplets all around the glass.

Spray the glass with the mirror effect spray paint

Immediately after step 3, spray a light, even coat of mirror effect spray paint on all sides of the glass. This is the paint I used.

Blot the glass with paper towels

Immediately after step 4, blot the entire glass container with paper towels to remove the excess vinegar and spray paint, giving it the mercury glass effect.

Repeat steps 3 through 5 until you get your desired effect

I repeated this process 2 or 3 times depending on the container, but you can repeat until it looks the way you want it to. Once you've finished blotting the glass (step 5), the paint should be dry enough to immediately do another coat.

John John (304)

There are two very similar statements in JavaScript: and for...of. And while they can be easily confused, they're actually quite different.