How to Log into a Frontier FiOS or Frontier Internet Router

Zach Zach (248)
5 minutes

Need to log into your Frontier FiOS or Frontier Internet router to change settings or apply updates? This guide will show you how to log into your router using the default IP address, username, and password.

Frontier router ×1
Computer, tablet, or mobile device ×1

Howchoo is reader-supported. As an Amazon Associate, we may earn a small affiliate commission at no cost to you when you buy through our links.

Connect to your network using either a wired (LAN) or wireless (WiFi) connection.

In your browser, navigate to http://192.168.1.1. This is the router gateway for your Frontier router.

A login screen should appear. If it doesn't, then the IP address for your particular model might be different. If this is the case, look at the sticker on back of the router to identify your model and use the corresponding IP address below:

Frontier Router Model Router IP
Actiontec F2250 http://192.168.0.1
Actiontec GT784WNV http://192.168.1.1
Actiontec WR424 (E, F and I) http://192.168.1.1
Arris NVG443B, NVG448B, NVG448BQ, NVG468MQ http://192.168.254.254
Arris NVG589 http://192.168.1.254
D-Link DSL-2750B http://192.168.1.1
Greenwave G1100 http://192.168.1.1
Netgear D2200D http://192.168.254.254
Netgear 7550 http://192.168.254.254
Pace 4111N, 5031NV, 5168NV http://192.168.1.254

Use your Frontier router credentials to log in. For most routers, the default administrator password is located on a sticker on the side of your router:

Username: admin
Password: (your password)

For some routers, the username and password will vary. Find your model below to find your Frontier router login info:

Frontier Router Model Username Password
Actiontec F2250 admin admin
Actiontec GT784WNV admin password
Actiontec WR424 (E, F and I) admin password or password1
Arris NVG443B, NVG448B, NVG448BQ, NVG468MQ (prompted) (prompted)
Arris NVG589 (prompted) (prompted)
D-Link DSL-2750B admin (from sticker)
Greenwave G1100 admin (from sticker)
Netgear D2200D admin admin
Netgear 7550 (prompted) (prompted)
Pace 4111N, 5031NV, 5168NV admin (from sticker)

You're logged in!

Now that you're logged in, you might as well change the default password to something more secure.

If the default password is in use and written on the router, anyone with access to your house can gain access to your router configuration, which is far worse than gaining access to the network itself!

To change the default administrator password, click Change Admin Password in the left navigation.

There’s got to be some way in!
Ash Ash (362)
5 minutes

It's time to log into your router, but how do we get in? Most devices come with a set of default credentials, but sometimes that's not enough.