After you've installed OctoPrint, consider your priorities when it comes to streaming. Do you want a budget-friendly camera? Do you want to use a camera you already have? Perhaps you just want to stream with high resolution. Whatever your project needs are, identify what they are before investing in a new camera.
Some more factors to consider: Do you want a permanent camera or one that can be easily removed? Do you want a low profile device that doesn't take up much space? Do you want a camera that mounts to a specific tripod or structure? Do you want a hot-swappable camera?
The official Raspberry Pi camera module works great with OctoPrint. The Raspberry Pi camera module is plug-and-play, so you won't have to worry about any special setup configurations. It's a low profile option, guaranteed to be compatible with the Raspberry Pi 1, 2, 3, and 4.
This module is designed for the Raspberry Pi and connects using the camera port on the Pi. It's an 8-megapixel camera that can create images with a resolution of 3280 x 2464.
The whole unit is only 25mm x 23mm x 9mm (not including the cable). If you want a small camera with a good image that's easy to mount, you may want to check out the Raspberry Pi Camera Module V2.
Octoprint will work with many USB cameras, but not all of them. Here's a list of compatible webcams known to work with OctoPrint. This makes it easy to set up a camera quickly with a spare webcam or USB camera that you might have lying around the house.
The biggest benefit of using a webcam is better image quality. You will likely spend a little time configuring your webcam to work with the Raspberry Pi, but the results are worth it. OctoPrint recommends using mjpg-streamer to set up the webcam. Visit the OctoPrint page on Github for tips on setting up your camera with OctoPrint.
Best USB OctoPrint camera
Most Logitech cameras are compatible with OctoPrint. One of the best (and most popular) for use with OctoPrint is the Logitech C920—recommended for its high resolution, wide FOV, and built-in hardware encoding.
Once you have your camera connected, log into the OctoPrint web interface. You can use the IP address of your Raspberry Pi or put
http://octopi.local into the address field of a browser window.
Look under the Control tab. This screen allows you to view and make adjustments to your Octopint video stream. Congratulations! Now you're ready to monitor your 3D printing progress remotely.
If you don't see anything, make sure the camera is properly connected. You may want to power everything off and reconnect the camera. If it still doesn't work, make sure the camera is working on other devices.